Installation Systems
for Ceramic Tile
& Dimension Stone
[ Division 9 ]





Cleaners & Sealers_________

TILE & GROUT CLEANER
(Tile & Grout Cleaner)

TILE & GROUT CLEANER is a Powerful, multi-purpose, spray cleaner. Removes soap scum and hard water deposits. Cleans mildew stains and renews grout joints and tile.



HEAVY-DUTY TILE & GROUT CLEANER  
(Concentrated Cleaner & Degreaser)

HEAVY-DUTY TILE & GROUT CLEANER is a concentrated high-alkaline cleaner and degreaser effectively removes grease, soap scum, body oil, mildew, stains, and algae from areas that have been neglected or subjected to heavy use. Heavy-Duty Tile & Grout Cleaner is specially formulated to strip off synthetic and acrylic waxes and floor finishes.


POLISH SEALER  
(Sulfamic Acid Based Cleaner)

POLISH SEALER is a clear, durable floor finish that resists surface abuse when properly maintained and leaves a beautiful high-sheen finish. Use a minimum of 2 hours prior to grouting for pre-grouting protection on unglazed porcelain tile. Allows moisture vapor transmission.


EPOXY HAZE & SEALER REMOVER 
(Multi-Purpose Stripper)

EPOXY HAZE & SEALER REMOVER is a non-flammable, multi- purpose stripper formulated with a long dwell-time to remove most sealers, epoxy grout haze, urethane coatings, synthetic finishes, adhesives and paints. Also draws out deep-set stains and removes heavy grease build up.


GROUT SEALER
(Water-based sealer)

GROUT SEALER is a new Water-based sealer that resists water, oil and acid-based contaminants. It simplifies maintenance and does not change the appearance of the grout after application. Allows moisture vapor transmission on most new installations.


CLEAR PENETRATING SEALER & GROUT RELEASE 
(For use over unsealed & any other unglazed surfaces )

CLEAR PENETRATING SEALER & GROUT RELEASE is a non- flammable, invisible, stain-resistant, water-based sealer. Design for use over unsealed brick pavers, concrete, Mexican-clay and any other unglazed surfaces when a natural look is desired Allows moisture vapor transmission.


HIGH GLOSS SEALER 
(Interior / Exterior Sealer)

HIGH GLOSS SEALER is a specially formulated water- based blend of acrylic polymers that provides both a stain resistant surface seal and a durable high-sheen finish - eliminating the conventional two-step method. May also be used as a pre-grouting sealer over clean tile surfaces a minimum of 2 hours prior to grouting. This product allows moisture vapor transmission and is not affected by ultra-violet light.


GROUT STAIN
(Color Guard)

GROUT STAIN is a unique concept in grout and concrete coatings. Formulated to sink deeply into pores, coating the aggregate and leaving the coloring below the wearing surface. It dries to a matte finish, which maintains the granular appearance of grout and provides a glare free, uniform color that is highly resistant to wear, sunlight, water, and extreme temperatures.


SAFE CLEAN CRYSTALS  
(For use over Mexican Saltillo & Stone)

SAFE CLEAN CRYSTALS is a non-fuming, odorless and non-volatile dry powder (Sulfamic acid) with select additives which when dissolved in water in proper proportions forms an efficient cleaning solution. Safe Clean Crystals will remove grout film.


PREMIUM COLOR CAULK
(Matches SGM Brand Grout)

PREMIUM COLOR CAULK is a premium quality sealant that provides a long-lasting water-resistant seal. It is formulated with siliconized acrylic to provide a flexible, mildew-resistant, stain-resistant, crack-resistant high adhesion product. It is color matched to all SGM sanded and non-sanded grout colors.


The PDF files that are available for download require Adobe Acrobat Reader.

If you do not have Acrobat Reader, you can download your free copy.