Home     Tile     Pool     About SGM     What's New?     Contact   
Contractors > Specialty Products
Product Selection Guide
Surface Preparation
Pool, Spa & Fountain Finishes
Decorative Concrete Finishes
Specialty Products
> Southcrete Masonry
> 2 Part Southcrete Paver Seal
> SC Brick Paver & Concrete Sealer
> SC Aqua Coat Paver Sealer
> Polymeric Paver Sand
> Glass Mosiac
> Sand Topping
> Glass Block Mortar
> Mortar Mix
Water Chemistry
Installation Specifications
Warranties
Coverage Calculators
Technical Services
Factory Trained Program
Sales Request
Distributor Locator
Request a Sample
Installation Videos


Specialty Products

SC MASONRY CLEANER & EFFLORESCENCE REMOVER

Southcrete Masonry Cleaner & Efflorescence Remover safely and quickly cleans a variety of cementitious substrates, such as Masonry, Concrete, Brick Pavers, River Rock, Architectural Concrete, Retainer Walls, etc., while dissolving all signs of efflorescence. This special synthetic acid formula dissolves more calcium carbonate and efflorescence than muriatic (hydrochloric) or phosphoric acid based cleaners. This cleaner can be used to prepare stone and masonry surfaces for clear sealers, stains or paints, or simply restore the original beauty and natural look.

2 PART SOUTHCRETE PAVER SEAL

2 Part Southcrete Paver Seal, a waterborne acrylic urethane, is a high performance 2-part clear sealer and finish that delivers unparalleled protection for pavers, decorative concrete, floors, walkways and other painted surfaces. The hard crystal clear film will withstand heavy use from vehicles and commercial traffic. It is resistant to most solvents and chemicals. Enhances the color of pavers and decorative concrete, and will not yellow. Ideal for interior and exterior use.

SOUTHCRETE BRICK PAVER & CONCRETE SEALER

Southcrete Brick Paver & Concrete Sealer is a premium quality, solvent borne acrylic sealer that is designed to penetrate and seal bare cementitious substrates. Its attractive gloss finish not only enhances and darkens unsealed pavers to give them a rich “Wet Look” finish, but also provides a superior toughness and durability that protects against the penetration of moisture, oils, grease stains, and other damaging or discoloring agents. Note: Do not use on Epoxy Chattahoochee or other solvent sensitive surfaces. Southcrete Paver & Concrete Sealer may be used on the following properly prepared substrates: Brick Pavers, Stamped Concrete, Brick, Driveways, Walkways, Decorative Stone, Floors, Concrete Chattahoochee, Garage Floors, Patios.

SC AQUA COAT 100% ACRYLIC PAVER SEALER/FINISH

Southcrete Aqua Coat 100% Acrylic Paver Sealer/Finish is a specially formulated clear sealer/finish specifically designed for application to brick pavers, concrete floors, and other cementitious floor type substrates. Its special 100% acrylic resin formulation provides a durable finish that penetrates and seals the surface, while protecting the surface from powdering, oil and grease stains, and it resists moisture penetration. Easy to apply, it provides superior wear resistance, excellent adhesion, product versatility, and provides superior UV light resistance. Its rich gloss finish enhances the color of brick pavers, resists hot tire pick-up, seals and waterproofs the surface, and is VOC Compliant.

POLYMERIC PAVER SAND

Polymeric Paver Sand by SGM, Inc. is a joint locking material used in place of regular sand to stabilize pavers, stone or blocks. Created from a mixture of sand and special additives, Polymeric Paver Sand is designed to be applied dry and hardened when wet. It’s main features are that it reduces weed growth, resists insect penetration and erosion. Perfect for patios, driveways or walkways the paver sand is open to foot traffic 24 hours and light vehicular traffic 72 hours after it is applied.

GLASS MOSIAC TILE THIN SET

Glass Mosaic Tile thin set is the ultimate one step polymer fortified thin set mortar specifically designed for outdoor and wet environments. GMT provides superior adhesion to glass, mosaic tiles, porcelain, ceramic, and natural stone. Its’ unparalleled proprietary formulation makes it the perfect choice for setting tile in swimming pools, spas, water features and other areas with submerged applications. GMT produces a ultra-white finish that will enhance the look of glass, mosaic tiles and any translucent tile or stone. For use in both commercial and residential applications.

SAND TOPPING

Ready to use sand / cement topping mix.

 

GLASS BLOCK MORTAR
(For Installing Glass)

Glass Block Mortar is a blend of white Portland cement, graded aggregates and proprietary additives formulated specifically for the installation and repair of glass blocks; Computerized batching of raw materials insures a high quality mortar eliminating guesswork of jobsite mixes.

MORTAR MIX

SGM mortar mix is a factory blend of special masonry cement and aggregates designed for laying bricks, concrete masonry units and stone.

 




800-641-9247   Going Green            Privacy           
Copyright 1978-2014 SGM Southern Grouts & Mortars, Inc         .