One-Step Spray Deck System
SGM One-Step Spray Deck System is a pre-blended decking system that incorporates dry resin technology which eliminates the need for liquid additives. Simply add water and spray or apply by trowel over new or existing concrete surfaces. Available in twelve (12) colors, this product is slip-resistant and comfortable under the foot. Southcrete™ One-Step Spray Deck System is a perfect choice for pool and spa decks, walkways, entrances, and driveways in both residential and commercial applications.
- One-step mixing — just add water
- Available in several colors.
- Superior bonding and flexibility.
- Anti-skid surface
- Low maintenance.
- Unlimited designs
- Eases of application with minimum downtime.
- Fast-curing; foot traffic in 24 hours and vehicle traffic in 48 hours.
- NOTE: Time may vary depending on weather conditions.
- Freeze/thaw resistant.
- Resistant to mildew.
All areas to be coated should be free of oil, grease, dirt, loose paint, and efflorescence. This can be accomplished by acid-etching and pressure washing at 2,500 — 3,000 psi. Make sure the acid has been neutralized and all residue is thoroughly rinsed off prior to application. Do not apply over standing water.
In a clean five (5) gallon pail, thoroughly mix a fifty (50) pounds bag of dry mix with approximately four (4) quarts of cool potable water until the mixture is free of lumps. ONLY MIX AMOUNT OF MATERIAL THAT CAN APPLIED WITHIN THIRTY (30) MINUTES OF MIXING. Let the mix sit for two (2) minutes, then re-mix again with a drill for one (1) minute. Mix on slow speed to ensure air is not entrained into the mix.
Immediately after mixing, fill the hopper with mix and begin spraying, covering approximately 75 percent of concrete surface. Depending on the temperature, substrate, or exposure to the sun, you can begin to knock down material with a trowel as soon as the material is sprayed. Test surface for dryness — the surface may be dry in approximately one (1) hour. Once the surface is dry, lightly scrape to remove any loose material or ridges. Using a roller or airless sprayer, apply two (2) thin coats of SGM Color Guard. Make sure to let the first coat dry completely.
Minimum curing is achieved in eight (8) hours. It is best to keep foot traffic off until the next day. Depending on the temperature, allow two (2) days for automobile or heavy traffic use.
Each bag of dry mix covers approximately 150—225 sq. ft. Desired texture and thickness affect coverage rates.
- NOTE: Coverage may vary according to condition and porosity of the substrate.
Southcrete™ One-Step Spray Deck should only be applied to concrete surfaces that have cured for at least seven (7) days. Do not apply when the surface or air temperature is below 50°F (fifty degrees Fahrenheit) or above 100°F (100 degrees Fahrenheit). Do not apply if frost is expected within 24 hours. Application thickness should not exceed ¼ inch on driveway surfaces and high traffic areas a knockdown finish is recommended.
WARNING — EYE IRRITANT CONTAINS PORTLAND CEMENT. Product is alkaline on contact with water. Use paddle for mixing to avoid splashing into eyes or contact with skin. During mixing or application avoid contact with eyes. In case of such contact, flood eyes repeatedly with water and CALL A PHYSICIAN. Wash thoroughly after handling and before smoking or eating. Do not take internally. CONTAINS FREE SILICA — DO NOT BREATHE DUST. Prolonged exposure to dust may cause delayed lung disease (Silicosis). This product may expose you to chemicals, including silica, which the State of California recognizes as a cause of cancer. For more information, visit the Proposition 65 Warnings Website (www.P65Warnings.ca.gov). Use NIOSH approved masks at all times to handle silica dust. KEEP OUT OF REACH OF CHILDREN.
CLEAN UP AND STORAGE
Keep from freezing and do not store in direct sunlight. Clean hands, tools, and containers with warm soapy water.
One (1) year in an unopened, properly stored container.
Southcrete™ One-Step Spray Deck lifetime will be greatly enhanced through proper and regular maintenance.
Sample colors are as accurate as modern technology can produce. Verify appearance with a test area before installation. Please request a One-Step Spray Deck key chain to make a color selection. Actual shade and texture will depend on job size conditions, mixing ratio, individual batches, and installation methods. Use constitutes acceptance.
SGM, Inc. warrants this product will perform in accordance with its intended use for a period of one (1) year from the date of manufacture. Any claim for a defective product must be submitted in writing to SGM, Inc., and samples of defect must be provided. SGM, Inc.’s sole obligation will be to replace any product determined to be defective by SGM, Inc. EXCEPT AS PROVIDED HEREIN, SGM, INC. MAKES NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. IN NO EVENT SHALL SGM INC. BE LIABLE FOR DAMAGES OF ANY KIND OR NATURE, WHETHER ARISING BY CONTRACT, TORT, OR OTHERWISE. SGM INC.’S SOLE OBLIGATION WILL BE TO REPLACE ANY PRODUCT DETERMINED BY SGM, INC. TO BE DEFECTIVE. Customers may acquire an extended five-year warranty.